OEM Customized Cemented Carbide PDC Thrust & Radial Bearing with Good Corrosion Resistance and Wear Resistance

• Standard: ISO9001:2015
• Application: Oil and Gas, Pump, Mwd, Lwd
• Material: Tungsten Carbide
• Type: Mwd/Lwd Carbide Parts
• Industry: Oil & Gas Industry
• Advantage: Wear-Resisting Long Life
• Model NO.: Zonco-10354
• Service: OEM/OEM
• Transport Package: Carton or Wooden Case.
• Specification: Customized
• Trademark: Zonco
• Origin: China
• HS Code: 84819000
• Production Capacity: 1000PCS Per Month

Product Description

OEM Customized Cemented Carbide PDC Thrust & Radial Bearing with Good Corrosion Resistance and Wear Resistance

Introudction:
      Zonco has been specialized in the cemented tungsten carbide industry more than 10 years,and able to manufacture all kinds of tungsten carbide parts and alloy wear resisting parts based on customers' drawings and material specification requirement(prodcuts inclduing APS series,GE series, MWD series, QDT series, SL series,etc.) welcome to contact us for more details.         

Products Advantages:
1. Increased Bearing Life
Our exclusive cladding sustains tight tolerances and remains durable, even under extreme heat and stress.
2. Reduced Operational Costs
3. Improved Mud Motor Performance
Operators can push motors without damaging the bearings, permitting sharper turns, faster penetration and less drilling time.
4. Enhanced Drilling Accuracy
Reduced bearing wear means that design tolerances are maintained downhole, resulting in improved mud motor control and greater drilling accuracy.
5. Unsurpassed Quality Standards
Zonco PDC bearings are designed and manufactured according to stringent quality standards that govern material selection, machining, infiltration brazing, surface finishing and packaging.

PDC bearings are very resistant to wear. Compared with traditional tungsten carbide or other hard alloy bearings, the life of diamond bearings is 4 to 10 times longer, and they can operate at high temperatures (currently the highest temperature is 233°C). The PDC bearing system can absorb excessive load for a long time, and the low friction loss in the bearing assembly further increases the transmitted mechanical power.
     
Main Products lines:   
1.Radial Thrust Bearing & PDC,TC Bearing
2.Tungsten Carbide Nozzles and Teeth
3.Valve Stem/plug and seats
4.MWD & LWD Carbide Parts
5.Carbide Parts for Downhole Tools 
6.Carbide Wear Parts for Mechanical Equipments
7.Carbide Drilling Dies
8.Carbide Buttons
9.Other Carbide Wear Parts used in extreme complex and severe working conditions (high temperature, strong corrosion and wear)
Products pictures are as Follow:

 1. Radial Thrust Bearing & PDC,TC Bearing

 2. Tungsten Carbide Nozzles and Teeth

 3. Valve Stem/plug and Seats 

 4. MWD & LWD Carbide Parts 

 5. Carbide Parts for Downhole Tools 

 6.Carbide Wear Parts for Mechanical Equipments

 7. Carbide Drilling Dies
    
 8. Carbide Buttons

 9. Other Carbide Wear Parts used in extreme complex and severe working conditions (high temperature, strong corrosion and wear)      

Company Advantages:

1.Experienced with high producing technology and facilities
2. Varying sizes and customized needs available
3. Quality and quantity assured  
4. Factory direct price
5. Lower cost and more flexible production management 

 

Tungsten Carbide Grades,Properties and Application  

Grade	WC%	Co/Ni%	Physical and mechanical properties			Grain size  μm	Recommended application
			Density g/cm3	TRS N/mm2	Hardness HRA
ZG01	100	0	15.3-15.5	1200	95.5	0.3	Ultra high hardness, high wear resistance, corrosion resistance, with certain damage resistance
ZG04X	96	4	15.0-15.2	1600	92.8	0.8-1.0	Suitable for wire drawing die, non-ferrous metal wire tensile wear-resisting parts
ZG06	94	6	14.8-15.1	2500	90.0	1.2	Good wear resistance, good compression resistance, suitable for wear resistance and high pressure resistance parts, good thermal rigidity
ZG06X	94	6	14.8-15.1	2400	91.5	1.0
ZG06A	94	6	14.8-15.1	2150	92.5	0.6-0.8
ZG08	92	8	14.6-14.9	2700	89.0	1.2-1.6	Good general performance, used for usual wear - resistant parts, molds, general tools, etc
ZG10.2	90	10	14.3-14.6	3800	91.8	0.7	Sub-fine tungsten carbide particles, good general performance
ZG10X	90	10	14.3-14.6	4000	92.2	0.6	Ultra fine tungsten carbide particles, excellent heat resistance
ZG11	89	11	14.3-14.7	2800	88.5	1.2-1.6	Anti-wear, anti-erosion, good comprehensive mechanical strength, suitable for wear-resistant parts in the petroleum, chemical and mechanical industries.
ZG12X	88	12	14.2-14.5	3000	89.5	1.0-1.2	Anti-erosion, good comprehensive mechanical strength, suitable for impact-resistant wear-resistant parts, molds, and roller rings.
ZG15	85	15	13.8-14.2	3000	86.5	1.2-1.6
ZG15X	85	15	13.8-14.2	4500	89.0	0.7	Sub-fine tungsten carbide particles, with good wear resistance and excellent toughness, which is suitable for making integral stamping dies, anti-vibration toolholders, etc.
ZG20	80	20	13.4-13.8	3100	85.0	1.0	Excellent wear resistance and toughness
ZN06	94	6	14.5-14.9	2000	90.0	1.2	Non-magnetic alloy, suitable for sealing ring, non-magnetic wear-resistant parts and corrosion-resistant parts.
ZN09	91	9	14.3-14.6	2300	89.0	1.2-1.6
ZN11	89	11	14.0-14.3	2600	88.0	1.2

Bussiness and Patent License of Cemented Tungsten Carbide

Welcom to visit our factory in Zhuzhou,China! and please feel free to contact me if you looking forward to high quality supplier of cemented tungsten carbide wear resistant parts customized
Benjamin Yan
Company Add: Building A3, Minor Enterprises Promotion Park, Huanhe Road(N), Tianyuan District, Zhuzhou, Hunan, China